SHANGHAI, CHINA · STEEL TRADING & PROCESSING SINCE 2021WhatsApp / WeChat +86 150 0187 7465
Shanghai Hongfu Industrial Co., Ltd. logoHONGFU INDUSTRIALSHANGHAI · CHINA
Home/Products/GCr15 Bearing Steel Round Bar
FLAGSHIP PRODUCT · BEARING STEEL BAR · Ø 20–200 MM · CUT TO LENGTH

GCr15 Bearing Steel Round Bar Supplier — 100Cr6 / SUJ2 / AISI 52100

Shanghai Hongfu Industrial Co., Ltd. supplies high-carbon chromium bearing steel round bars from leading Chinese special steel mills: GCr15 and GCr15SiMn, with international equivalents 100Cr6, SUJ2, AISI 52100 and 100CrMn6 / SUJ3. Bars from 20 to 200 mm in diameter are available as-rolled, spheroidize-annealed, peeled or ground, and saw-cut to your required length with a Mill Test Certificate for every heat number. FOB Shanghai / CIF / CFR worldwide. Standard MOQ 20 MT, fastest lead time 15 days.

Request a QuoteChat on WhatsApp
MOQ 20 MTFastest lead time 15 daysQuotation within 24 hMTC with every shipment

GCr15 Bearing Steel — A Closer Look

From mill bundle to cut-to-length bar and seaworthy packing, every step is documented against a heat number. These are our own stock and processing shots, not catalogue images.

GCr15 bearing steel round bars bundled by heat number with MTC
Bundled by heat number
Each bundle is tagged and matched to its MTC.
Band saw cutting GCr15 / 100Cr6 bearing steel bars to length
Saw-cut to length
Ø 20–200 mm, clean and accurate cut faces.
VCI anti-rust export packing for GCr15 bearing steel bars
Seaworthy packing
VCI anti-rust wrap and steel strapping for ocean freight.
Bearing steel is our core product line. Looking for flat products as well? We also supply galvanized coil, cold rolled coil and galvalume coil — all can be consolidated into one shipment from Shanghai.

High-carbon chromium bearing steel for bearings, forging and machining

GCr15 is the standard high-carbon chromium bearing steel used for bearing rings, rolling elements and precision machined components requiring high hardness and wear resistance after heat treatment. We source from leading Chinese special steel mills and supply bars bundled by heat number, so traceability is maintained from mill to your machining line.

Choose the delivery condition that fits your process: as-rolled, spheroidize-annealed for improved machinability, peeled, or ground. Our in-house band saw cuts round bars from Ø 20 to 200 mm to your required length with clean, accurate cut faces, ready to load into forging or machining. Every heat number carries its own MTC, and third-party SGS / BV / TÜV inspection is welcome before shipment. Related flat products — galvanized, cold rolled and galvalume coil — can be consolidated into the same order.

Typical applications

  • Bearing rings and rolling elements
  • Forged components and precision machined parts
  • Tooling, guides and wear-resistant components
  • Spheroidize-annealed stock for CNC machining
  • Automotive and industrial bearing manufacturing

What you receive with every order

Mill Test Certificate with every shipment · full heat-number traceability · third-party inspection (SGS / BV / TÜV) welcome · replacement guarantee for verified quality issues · export-grade packing for long-distance sea freight.

GCr15 / 100Cr6 / SUJ2 bearing steel round bars bundled by heat number Band saw cutting GCr15 bearing steel round bars to required length

Specifications & available grades

ItemSpecification
ProductHigh-carbon chromium bearing steel round bar
Chinese gradesGCr15 · GCr15SiMn
International equivalents100Cr6 · SUJ2 · AISI 52100 · 100CrMn6 / SUJ3
Diameter rangeØ 20–200 mm
Delivery conditionAs-rolled, spheroidize-annealed, peeled or ground
CuttingIn-house band saw, cut to length with clean faces
CertificationMill Test Certificate for every heat number, full traceability
Third-party inspectionSGS / BV / TÜV welcome
Export packingBundled by heat number, protected for long-distance sea freight
MOQ20 MT per specification · mixed sizes in one container
Lead timeFrom 15 days for stocked specifications · mill orders confirmed at quotation
Trade termsFOB Shanghai / CIF / CFR

Grade Equivalents, Chemistry & Delivery Conditions

GCr15 is the Chinese designation for high-carbon chromium bearing steel. Buyers in Europe, Japan and North America usually ask for the equivalent grades below; we quote and certify against the standard you specify.

Cross-standard grade equivalents

StandardGradeNotes
GB/T 18254 (China)GCr15Standard high-carbon chromium bearing steel
EN ISO 683-17 (Europe)100Cr6 / 1.3505Commonly accepted equivalent to GCr15
JIS G4805 (Japan)SUJ2Commonly accepted equivalent to GCr15
ASTM A295 (USA)52100 / AISI 52100Commonly accepted equivalent to GCr15
GB/T 18254 (China)GCr15SiMnHigher Si / Mn for larger cross-sections
EN ISO 683-17 / JIS G4805100CrMn6 / SUJ3Commonly accepted equivalents to GCr15SiMn

Typical chemical composition — GCr15 (GB/T 18254)

ElementTypical range (wt %)ElementTypical range (wt %)
C0.95–1.05Cr1.40–1.65
Si0.15–0.35Mn0.25–0.45
P≤ 0.025S≤ 0.025
Mo≤ 0.10Ni / Cu≤ 0.25 each

Typical ranges shown for reference. The exact heat analysis for your batch is stated on the Mill Test Certificate shipped with every bundle; third-party SGS / BV / TÜV verification is welcome.

Delivery conditions

ConditionWhy buyers choose it
As-rolledFor forging or for buyers who heat-treat in-house
Spheroidize-annealed (+A)Improved machinability; typical hardness ≤ 207 HBW, confirmed on the MTC
PeeledSurface decarburisation removed, tighter diameter tolerance
GroundBest surface finish and tolerance for precision machining

Why bearing steel is our flagship line

Mill-direct sourcingLong-term supply from leading Chinese special steel mills keeps grade availability and lead times predictable.
Heat-level traceabilityEvery bundle carries its own heat number and MTC, from mill to your machining line.
In-house saw cuttingØ 20–200 mm cut to your length with clean faces, ready to load.
Consolidated shipmentBars can share a container with GI / CRC / GL coil from Shanghai, lowering freight per tonne.

In-house processing, quality & export

Slitting, cut-to-length and bar cutting

Shanghai Hongfu Industrial Co., Ltd. runs three in-house lines so material arrives ready for your production line: a cold-rolled slitting line for material 0.3–3.0 mm thick at speeds up to 200 m/min with slit widths from 20 mm and clean edges; a levelling and cut-to-length line producing flat sheets and blanks to your required length; and a band saw for bearing steel round bars from 20 to 200 mm in diameter. Processing covers CRC, electro-galvanized, hot-dip galvanized, galvalume, pickled, stainless and aluminium coil.

Quality documentation

Every batch ships with a Mill Test Certificate (MTC) and full heat-number traceability to the producing mill. Third-party inspection by SGS, BV or TÜV is welcome before shipment, and verified quality issues are eligible for replacement. Our documentation set includes the MTC, packing list, commercial invoice, certificate of origin and shipping documents.

Shipping from Shanghai

We quote FOB Shanghai / CIF / CFR and ship from the Port of Shanghai to Southeast Asia, the Middle East, Africa, Latin America and beyond. Seaworthy export packing uses waterproof wrap, steel strapping, wooden cradles and VCI anti-rust protection for long-distance sea freight. After order confirmation we issue a proforma invoice, a 30% deposit starts production, and the balance is settled against documents. Send your specification, quantity and destination port for a quotation within 24 hours.

Get a quotation within 24 hours

Send the grade, size, quantity and your destination port. We will return a clear FOB Shanghai / CIF / CFR offer with the available specification and packing method. MOQ 20 MT; fastest lead time 15 days.

Email Us Now Chat on WhatsApp

Frequently asked questions

Which standard and chemical composition apply to your GCr15 / 100Cr6 / SUJ2 bars?

GCr15 is supplied to GB/T 18254 with typical chemistry C 0.95–1.05%, Si 0.15–0.35%, Mn 0.25–0.45%, Cr 1.40–1.65%, P and S each ≤0.025%. Equivalents are EN ISO 683-17 100Cr6, JIS G4805 SUJ2 and ASTM A295 52100. The exact heat analysis is stated on the MTC shipped with each bundle.

What hardness can I expect from spheroidize-annealed GCr15?

Spheroidize-annealed (+A) bars are supplied for improved machinability, typically ≤ 207 HBW; the certified value for your heat number is stated on the MTC. As-rolled, peeled and ground conditions are also available.

Do you also supply GCr15SiMn, 100CrMn6 or SUJ3?

Yes. Alongside GCr15 we supply GCr15SiMn and its common equivalents 100CrMn6 / SUJ3 for larger cross-sections, in the same diameter range and delivery conditions. Tell us your national standard and we will confirm the closest available grade.

Which international grades are equivalent to GCr15?

GCr15 is commonly specified alongside 100Cr6, SUJ2 and AISI 52100; GCr15SiMn corresponds to 100CrMn6 / SUJ3. Send your national standard and we will confirm the closest available grade and its MTC chemistry.

What bar diameters can you supply?

Round bars from 20 to 200 mm in diameter. Other sizes can be checked against mill availability on request.

Can bars be cut to length before shipment?

Yes. Our in-house band saw cuts to your required length with clean cut faces and accurate lengths, ready for forging or machining.

What delivery conditions are available?

As-rolled, spheroidize-annealed, peeled or ground. Spheroidize-annealed stock is commonly chosen where machinability matters.

Is an MTC provided for each heat?

Yes. Every heat number carries its own Mill Test Certificate, and SGS / BV / TÜV pre-shipment inspection is welcome.

Can I combine bearing steel bars with steel coil in one order?

Yes. Many customers consolidate bearing steel bars with galvanized, cold rolled or galvalume coil in a single shipment from Shanghai. Ask for a consolidated FOB / CIF quotation.

What is the MOQ?

Our standard MOQ is 20 MT per specification. Mixed sizes can be combined in one container. Send your grade, dimensions and destination port for a confirmed FOB Shanghai / CIF / CFR quotation within 24 hours.

How fast can you deliver?

The fastest lead time is 15 days from order confirmation for stocked specifications. Mill orders take longer depending on grade and coating weight; we confirm the exact delivery schedule in writing with every quotation.

Related steel products